Expert Answers about BMW 1 Series
- Does Curt Trailer Hitch C11184 Fit a 2013 BMW 128i Convertible
- The Curt Hitch part # C11184 that you referenced is confirmed to fit a 2013 BMW 128i convertible and would probably take a dealership about an hour to install. We had a customer come back and say it took them 2 hours but a dealership would be able to knock it out much quicker.
view full answer... - Where Are Fascia Removal Tabs Located on 2012 BMW 128i
- I've linked the instructions for the Curt # C11184, but it shows the tab for the fascia; the tab should be located at the spot where the fascia meets the bumper. You will want to push in on the fascia to get it to disengage from the bumper. If you check out the linked instructions it shows 2 pictures- one of the bumper fascia tab and one where the fascia has been removed and the side plate is installed. The small holes there show where the tabs are going to catch on the bumper plate, so...
view full answer... - Correct Tail Light Wires to Splice Into when Installing Trailer Wiring Harness on 2011 BMW 1-Series
- Wiring harness # C59496 is a universal fit type of item that fits many vehicles. Also, there is no standard color code for wiring/function; vehicle manufacturers can use whatever color they want and it frequently changes from model year to model year, and even within the same model year for a given vehicle.
That is why there is a circuit tester included. You have to test the vehicle tail light wiring to determine function and then install the converter accordingly.
view full answer... - Installation Instructions and Details for the Curt Trailer Hitch # 11184 for the 2010 BMW 135i Hitch
- On the CURT Class I 1-1/4 Inch Hitch, part # 11184, for the 2010 BMW 135is the under body panels are at the rear of the vehicle underneath behind the rear fascia. Detailed trimming information is provided in the installation instructions (see link).
All of the hardware required to install the hitch on your BMW 135i coupe or convertible is included.
I have no idea how many of these hitches have been installed on the BMW 135i, but in the last several months we have sold more than 10 of...
view full answer... - How to Install the Curt Trailer Hitch Receiver on a 2013 BMW 128i
- The only hitch receiver we have confirmed to fit your 2013 BMW 128i is the Curt Trailer Hitch Receiver part # C11184. Unfortunately, we have not had a chance to install this hitch on a 2013 BMW 128i yet. However, the installation process is fairly straightforward and I will do my best to walk you through the process below.
Before you get started you will need a few tools for installation: 8, 10, and 19mm sockets, 12" extensions, Ratchet, 19mm wrench, Flat Head Screwdriver, Rotary Tool...
view full answer... - Instructions for Tekonsha ZCI Wiring Kit Explained for a 2012 BMW 135i
- I can help explain the instructions better for the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT, but I don't have the details about the wiring on your 2012 BMW 135i so you will need to do some testing with a circuit tester # PTW2992 on your end.
The first thing you need to do is determine what kind of lighting system you have by using the circuit tester to see what happens to the different wires when you use the brake pedal, turn signals, and use your headlights. You can use...
view full answer...
Go To Results